BMW TIS Online
X

Tag: m50

Gas and GR Bowden cable BMW E31, E32, E34, E36, E38

00350501/0797 US models Situation: The gas Bowden cable and the Bowden cable of the cruise control system (GR) on the…

Remove check valve on engine BMW M50

11 00 Unscrew valve. Installation: Replace O - ring.

Removing tensioning roller with mounting block on engine BMW M50

11 00 Unscrew tensioning roller. Unscrew mounting block. Note: The hydraulic belt tensioner is filled with oil, so that a…

Replacing main bearing shells on engine BMW M50

11 00 The crankshaft is marked with yellow, green or white paint depending on main bearing journal tolerances. Caution! Check…

Removing and installing cyliner head on engine BMW M50 VANOS

11 00 Remove intake manifold together with throttle valve. This step will have already been carried out on engines which…

Removing vibration-damper hub on engine BMW M50 VANOS

11 00 Hold flywheel with Special Tool 11 2 170. Unscrew central bolt. Take off washer and hub. Installation: Position…

Removing oil pan on engine BMW M50 VANOS

11 00 Unscrew and pull out oil dipstick guide tube. Installation: Check sealing ring, replacing if necessary. Unscrew all bolts…

Replacing front radial sealing ring on engine BMW M50 VANOS

11 00 Fit special tool 11 2 383 to crankshaft. Removing radial sealing ring: Screw on special tool 11 2…

Removing vibration damper on engine BMW M50 VANOS

11 00 Arrest engine with special tool 11 2 170. Caution! Do not use a mandrel to hold the engine.…

Removing and installing, sealing or replacing oil pan on engine BMW M50 from 9 / 1992

11 13 000  Note: For removal of oil pan, front axle support must be lowered. There is no need to…

Removing oil pump on BMW E36 with engine M50 VANOS

11 00 Unscrew nut for sprocket. Caution! Left-hand threads. For tightening torque, refer to Technical Data Lift off sprocket with…

BMW engine oil service M50, M52, S50US, S52, M52TU

00 00 249  (change engine oil and oil filter insert) Version with central screw: Unfasten full-flow oil filter cover. Engine…

Checking operation of VANOS on engine BMW M50

11 36 000 Interrogate fault memory of engine control unit. VANOS control unit connector is located behind oil filter and…

Replacing hub for vibration damper on engines BMW M50, M52, S52, M52TU

11 23 031 Remove vibration damper. Note: Remember to fit dowel pin. Secure special tool 11 2 150 with special…

Removing and installing, sealing or replacing timing case cover at bottom on engine BMW M50

11 14 110 Remove alternator drive belt. Check drive belt for coolant and oil residues, replace if necessary. Caution! It…

Replacing oil-pressure switch on engines BMW M40, M43, M50, S50

12 31 280 Applies to all engines: Release oil-filter cover so that oil from oil filter returns to oil pan.…

Replacing camshaft on engine BMW M50 VANOS

11 31 001 (Intake or exhaust side, as applicable) The intake and exhaust camshafts can be changed in the vehicle.…

Replacing piston cooling-spray jets on engine BMW M50 VANOS

11 00 Note: Spray jets are installed in bores of thrust bearings 2 ... 7 and serve to lubricate piston…

Removing crankshaft on engine BMW M50 VANOS

11 00 Fit special tool 11 2 383 to crankshaft. Remove sprocket with special tool 11 2 000 in conjunction…

Removing lower timing chain and guides on engine BMW M50 VANOS

11 00 Fold tensioning rail in downwards direction. Lift out timing chain. Remove tensioning rail. Removing Chain Guide: Lift upper…

This website uses cookies.