BMW TIS Online
X

Replacing rear left or right support bearing for shock absorber BMW M2 F87

33 52 161

Special tools required:

2360213

Installation note:

  1. All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
  2. Retaining elements on chassis and suspension and steering parts must be replaced.

Release nut (1) with special tool

2360213, reversible ratchet with extension (3) and socket SW10.

Remove spring strut mounting (2).

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber!

Note:

Separate procedure for EDC shock absorber .

Necessary preliminary tasks:

Remove rear shock absorber.

Removal:

Remove protective cap (1) and sealing washer (2).

Installation:

Position support bearing (2).

Part:

Replace nut (1).

Tighten down nut (1) with special tool

2360213, reversible ratchet with extension (3), socket SW10 and torque wrench with ring spanner attachment SW21.

Tightening torque 33 52 2AZ:

2AZ Support bearing on shock absorber
F80 / F82 / F83 / F87 M14 Renew nut. 38 Nm

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber!

Check sealing washer (2) for damage.

Part: Renew sealing washer (2) if necessary.

Place sealing washer (2) in position.

Mount protective cap (1).

Required follow-up work:

Installrear shock absorber.


Categories: 33 Rear axle
Tags: bmw 2bmw m2f87m2shock absorbersupport bearing
tisbimmer :
Disqus Comments Loading...

This website uses cookies.