34 32 980 

Necessary preliminary work:

Read and comply with General Information.

Remove wheel.

Removal:

Replacing rear left or right brake hose BMW M2 F87

Press brake pedal down to floor and secure with pedal support.Note:

The pedal support may only be released when the brake lines are reconnected.

This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.

Replacing rear left or right brake hose BMW M2 F87

Disconnect brake hose from brake line (1).

Grip brake hose at square head (2) so that connecting piece cannot rotate in retaining bracket.

Detach brake hose from brake caliper (3).

Installation:

Important!

Make sure that the brake hose is routed correctly!

Replacing rear left or right brake hose BMW M2 F87

Mount brake hose on brake caliper (3) and tighten.

Tightening torque 34 32 3AZ:

Type Thread Tightening specifications Torque
1AZ Brake line screw connection/

union screws

F80 / F82 / F83 / F87 M12x1/M10x1 17 Nm
2AZ Brake hose to brake caliper, front
F80 / F82 / F83 / F87 24 Nm
3AZ Brake hose to brake caliper, rear
F80 / F82 / F83 / F87 24 Nm

Mount brake hose on brake line (1) and tighten.

Important!

First tighten brake hose on brake caliper.

Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.

Tightening torque 34 32 1AZ.

Required follow-up work:

Bleed brake system.

Mounting the wheel.