51 11 794 

(Bumper removed)(If applicable, remove front bumper, refer to 51 11 000)

Release screw and remove holder for bumper carrier.Installation note:

Replace screw (microencapsulation) or apply Loctite 270 to original screw when reinstalling (sourcing reference BMW Parts Service).

Tightening torque, refer to Technical Data 51 11 2AZ

Release screw and remove impact absorber.

Tightening torque, refer to Technical Data 51 11 3AZ

Installation note:

Height of bumper is adjusted by turning hexagon socket screws (1) on impact absorber (2).