25 11 001
Necessary preliminary tasks:
Remove gearshift lever.
Pull ball socket (1) off the gearshift lever.
Detach rubber boot (2) from gearshift lever (1).
Degrease gearshift lever (1).
Coat rubber boot (2), on inside of shaped element, with Circo Light.
Circolight, refer to BMW Group Parts.
Pull rubber boot (2) from above over gearshift lever (1) and align.
Arrow (3) on rubber boot must point in direction of travel.
Grease ball joint.
Press gearshift lever into ball socket (1) until it engages.
Required follow-up work:
Attach gearshift lever.