64 11 071

Disconnect battery ground lead.
Remove and install instrument panel trim on left side 51 16 200.

Remove radio opening mask or radio.
Pull opening covers (1) or switches (2) out of control panel. Pull off plugs (3) on switches (2).

Unscrew screws.
Pull out control panel slightly.

Lift out clamp (1).
Disconnect cable (2) on lever (3).

Connect cable (1) in sliding control (2). Push sliding control and ait flap against stop. Turn sleeve (3) enough until in can be placed in opening. Secure cable with clamp (4).

Pull out clamp (1). Disconnect cable (2) on lever (3) and remove.

Cable sleeve (1) must be flush with stop (2).