33 55 041 

Necessary preliminary work:

Remove rear wheel.

Removal:

Replacing anti-roll bar link for anti-roll bar on left or right BMW M2 F87

Release nuts (3); if necessary, grip at inner Torx socket.

Release screw (1).

Remove anti-roll bar link (2).

Installation:

Replacing anti-roll bar link for anti-roll bar on left or right BMW M2 F87

Insert the screw (1) in the anti-roll bar links.

Position the anti-roll bar link (2) on the wheel carrier.

Insert anti-roll bar link on anti-roll bar.

Part: Replace nut (3).

Tighten nuts (1), if required counter support at Torx socket.

Tightening torque 33 55 2AZ:

Type Thread Tightening specifications Torque
1AZ Anti-roll bar bracket on rear axle support
F80 / F82 / F83 / F87 M8 28 Nm
2AZ Anti-roll bar link to anti-roll bar
F80 / F82 / F83 / F87 M10 Renew nut. 56 Nm
3AZ Anti-roll bar link to wheel carrier
F80 / F82 / F83 / F87 M10 56 Nm

Tighten screw (1).

Tightening torque 33 55 3AZ.

Installation note:

Use a torque wrench with a ring spanner attachment for tightening the nut (3) and screw (1).

Required follow-up work:

Install rear wheel.