Replace the oil level sensor in the engine BMW S85
12 61 285
Follow the instructions on protection against electrostatic discharge (ESD – ElectroStatic Discharge)!
Necessary preliminary tasks:
Turn off the ignition.
Remove reinforcement plate.
Drain the engine oil.
Unlock and disconnect plug connection (1).
Tightening torque 12 61 2AZ.
Remove the sensor (2) oil level.
Clean sealing surface of the oil sump.
Replace level sensor gasket.
Insufficient value of torque leads to oil leakage.
Too much torque will damage the oil level sensor.
Pour the engine oil.