11 15 140
Necessary preliminary tasks:
Remove cylinder head cover
Release screws in the sequence 3 – 1.
Remove oil separator.
Illustration: Cylinders 5 to 8.
Risk of damage!
All engine oil and contamination must be removed from all threaded holes.
Compliance with torque specifications for screw connections is mandatory!
Install the oil separator with duct.
Parts: Replace screws.
Tighten screws in the sequence 1 – 3.
Tightening torque 11 12 11AZ:
|N63||M6 x 20||Replace screws||10,5 Nm|
Required follow-up work:
Install cylinder head cover