51 21 …
Open side window completely.
Insert special tool 00 9 324 at front (at A-pillar) in window cavity (1) (TOP label pointing upwards).
Insert special tool 00 9 324 at rear (at C-pillar) in window cavity (2) (TOP label pointing upwards).
For purposes of clarity, graphic shows inner door panel and side window removed.
Special tool 00 9 324 must be correctly guided under weather strip (1).
- Short leg, bottom
- Long leg, top (TOP)
Start at the front or rear, depending on the model.
Risk of damage!
Raise weather strip (3) no more than 5 mm in each levering operation, otherwise the strip will be bent.
Position special tool 00 9 318 on door trim panel (1).
Push suitable tool (2) into the bore hole of special tool 00 9 324 and thus lever out the weather strip (3) maximum 5 mm in upward direction.
Guide special tools 00 9 324 and 00 9 318 forward or backward step by step until weather strip (3) is fully removed.