Removing and installing stabilizer bar BMW 3 E36
REMOVAL
• To establish the car on a lift and remove the front wheels.
• Unscrew the nut securing push rod to anti-roll bar.
• Loosen the nuts on the stabilizer bar supports.
• Remove the stabilizer bar and supports cushion.
INSTALLATION
Installing stabipizatora performed in reverse order, with the following:
Изображение
Fig. Adjusting the front toe: 1 – locknut
– Pre-clean the seating surfaces of support pillows;
– To replace the self-locking nuts;
– Comply with the specified tightening torques of threaded connections.