13 54 030 

Read and comply with notes on protection against electrostatic discharge (ESD protection).

Necessary preliminary tasks:
Remove charge air line to throttle valve


Release screws (1) on throttle body (2).

Unlock tank ventilation line (1) and disconnect.

Unlock connector (2) and remove.

Remove throttle body (3).

Installation note:

Replace sealing ring (1) of throttle body (2).


Install throttle body (3).

Connect and lock tank ventilation line (1).

Tank ventilation line (1) must snap audibly into place.

Connect connector (2) and lock.

Connector (2) must snap audibly into place.

Tighten screw (1) on throttle body (2).
Tightening torque 13 54 1AZ.