Removing and installing, replacing wiper motor BMW 5 E39

67 63 511

Remove the lever arm wiper system assembly,
see. 61 61 270

Unscrew the nut and remove crank with rods.

Release screws and remove the wiper motor from the bracket.

Install the wiper motor with the bracket. Connect the connector and activate the wiper to return to its original position. Again, disconnect the connector.
Align wiper rod on one line, and impose on the crank shaft and tighten the wiper motor. Pay attention to tightening torque,
see. Specifications 6161 4AZ
Reconnect connector.