Removing and installing, replacing the accelerator lever of the BMW 3 E46
35 41 010
Remove trim pedal mechanism,
see. The core group (HG) 51.
Disconnect return spring.
Unscrew the nut and pull out the inside of the bracket.
Tightening torque = 2.8 Nm
Click on the fixing hooks and pull the lever of the accelerator pedal arm.
Check the bushing (1) joint, replace and lightly grease if necessary
see. to BMW Service Operating Fluids.
Disconnect the throttle cable from the lever of the accelerator pedal.
Reject the lever down and remove it from the accelerator pedal.