51 43 075 

Necessary preliminary tasks:

Remove front entrance cover strip (inside)

Remove trim for instrument panel, bottom left

Removing and installing, replacing side trim panel, footwell, on A-pillar, right BMW Z4 E85

Detach mucket (1) in area of panel (3).

Release screw (2).

Unclip panel (3) in direction of arrow at retaining points (4) and remove.

Removing and installing, replacing side trim panel, footwell, on A-pillar, right BMW Z4 E85

Installation:

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Make sure lugs (2) are correctly seated in associated mountings.

Position panel (3) preinstalled with clips (1) on associated bores and clip into place.