51 43 070

Necessary preliminary tasks:

Remove front entrance cover strip (inner)

Remove trim panel for pedal assembly.

Removing and installing, replacing side trim panel, footwell, on A-pillar, left BMW Z4 E85

Release screw (1).

Remove hood/bonnet actuating lever (2) in direction of arrow from panel (3).

Removing and installing, replacing side trim panel, footwell, on A-pillar, left BMW Z4 E85

Detach mucket (2) in area of panel (5).

Release screws (1).

Unclip panel (5) in direction of arrow from retaining points (4).

Unlock plug connection of switch (3) and disconnect.

Remove trim (5).

Removing and installing, replacing side trim panel, footwell, on A-pillar, left BMW Z4 E85

Installation:

If necessary, lever out clips (3) remaining in bores.

If necessary, replace faulty clips (3).

Make sure lug (4) is correctly seated in associated mounting.

Position panel (3) preinstalled with clips (1) on associated bores and clip into place.

Replacement:

Press catches and remove switch (1) in direction of arrow.