Removing and installing, replacing radiator for BMW E47 EGR system
11 71 100
Warning!
Danger of burns!
These works must be carried out only on a cold engine.
Necessary preliminary tasks:
Remove the soundproof cover.
Remove fan cowl.
Drain coolant from radiator.
Disconnect the vacuum line (1).
Connect the vacuum pump to the by-pass valve diaphragm mechanism.
Using a vacuum pump, check the operation of the exhaust gas recirculation system.
Release screws (2).
Disconnect the diaphragm mechanism.
Release screws (1).
Installation:
Replace gasket.
Release screws (1)
Release screw (1).
Installation:
Replace all gaskets.
Assemble the motor.
Bleed the cooling system.
Check the tightness of the cooling system