16 12 200 

Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste disposal regulations.

Necessary preliminary tasks:
Remove rear underbody protection.

Removal:

Unlock and detach fuel line (1).
Unlock fuel line (2) and pull off.
Catch and dispose of escaping fuel.
Release screw (3) and remove holder (4).
Remove fuel filter (5).

Installation:

Install new fuel filter (5).
Connect and audibly lock fuel line (2).
Connect and audibly lock the fuel lines (1).
Install holder (4) and tighten screw (5).
Tightening torque 13 32 1AZ.

Required follow-up work:
Check fuel system for leak tightness. Install the rear underbody protection.