63 12 001
Necessary preliminary tasks:
Remove front bumper trim .
Remove high-pressure nozzle
Unlock plug connection (1) on headlight and disconnect.
Release screws (1) on headlight (2).Installation:
Tighten screws (1) hand-tight only.
Pull headlight fully towards front.
Close hood/bonnet and adjust headlight to fit.
Open hood/bonnet and tighten down screws (1).
Pull out headlight (1) forwards slightly.
Unfasten plug connection (2) and disconnect.
Remove headlight (1).
Follow instructions for handling light bulbs (exterior lights) .
If necessary, remove bulbs .