54 12 136 

Installation: If headliner is difficult to move, apply a light coat of Renax GL1 (manufactured by Fuchs) to guide duct.

Remove glass sunroof lid.

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Slowly pull headliner (floating) fully towards front.

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Release screws (1) from sliding member (2).

Installation:

Tightening torque, 54 12 5AZ.

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Press headliner (1) to right against springs and at same time detach sliding member (2) from guide duct (3) and headliner (1).

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Installation:

Rear sliding member (1) must be fitted behind driver (2).

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Pull headliner (1) to left/upwards with sliding members (2) out of rail (3).

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Pull sliding member (1) at front/rear off springs (2) of headliner (3).

Removing and installing, replacing headliner for glass slide/tilt sunroof lid BMW 3 E46

Installation:

Nubs (2) of spring (1) must snap into place in guides (4) of sliding member (3).