11 22 500

Aluminium screws/bolts must be replaced each time they are released.
For reliable identification:
Aluminium screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage).

Fasten dual-mass flywheel with special tool 11 9 260 and 11 9 265 .

Release flywheel bolts with special tool 11 4 180 /

Installation note:

Fit new flywheel bolts.

Clean all threads for flywheel bolts in crankshaft.

Installation note:

Pay attention to dowel pin.

Installation note:

Ensure installed position of magnet wheel is correct.

Fasten screws in sequence 1 to 6.
Tightening torque: 11 22 1/2AZ.
Assemble engine.