51 47 030 

Necessary preliminary tasks:

Version with rear seat (normal) only
Remove rear seat.
Version with rear seat (comfort) only
Move rear seat completely towards front and top.

Removing and installing, replacing entrance cover strip, rear (inside) left or right BMW 7 E65

Press entrance cover strip (1) at front towards bottom and feed out from door pillar trim (2).

Removing and installing, replacing entrance cover strip, rear (inside) left or right BMW 7 E65

Remove entrance cover strip (1) at front from clips (2) of door pillar.

Removing and installing, replacing entrance cover strip, rear (inside) left or right BMW 7 E65

Release plastic nut (1).

Feed cover strip (2) forwards and upwards out of trim (3) if necessary with aid of fishbone 00 9 321 and remove.

If necessary, lever clips with end cutting pliers (head of pliers surface-ground) out of door pillar.

Note:

If necessary, detach mucket before removing trim on rear comfort seat.

Removing and installing, replacing entrance cover strip, rear (inside) left or right BMW 7 E65

Installation:

Feed in guide lugs (1) under trim (2).

Removing and installing, replacing entrance cover strip, rear (inside) left or right BMW 7 E65

Installation:

If necessary, replace faulty clips (1).

Clip mounts of entrance cover strip (2) must not be damaged.

Push clips (1) onto entrance cover strip (2).