21 52 510
After completing work bleed clutch hydraulic system, refer to 21 00 006.
Remove underbody protection from transmission.
Seal supply hose to clutch master cylinder with special tool 13 3 010.
Remove pressure line from clutch slave cylinder.
Installation: Tightening torque, refer to Technical Data 21 52 1AZ.
Relieve tension on clutch slave cylinder slowly; otherwise air will be drawn in through sealing sleeve.
Tightening torque, refer to Technical Data 21 52 5AZ.
Clean pressure pin and support face on release lever.
Lightly grease pressure pin.
Grease, refer to BMW Service Operating Fluids.