BMW TIS Online
X

Removing and installing, replacing auxiliary water pump for exhaust turbocharger on engine BMW S55

11 51 055

Warning!

Risk of scalding!
Only perform repair work after engine has cooled down.

Recycling:
Catch and dispose of drained coolant in a suitable collecting vessel.
Observe country-specific waste disposal regulations.

Necessary preliminary tasks:
Remove right-hand intake silencer housing.
Remove stiffening plate

Disconnect plug connection (1).

Unlock coolant line (2) and release.

Unlock coolant line (3) and release.

Release screws (1).

Remove auxiliary coolant pump with holder.

Installation note:

Installing auxiliary coolant pump

Install auxiliary coolant pump with holder.

Secure screws (1).

Tightening torque: 11 51 3AZ.

Installation note:

Clean the electric plug connections with compressed air and spray using contact spray 6.2 .
Disconnect plug connection (1).
Attach coolant line (2) to the coolant pump.
Attach coolant line (3) to the coolant pump.
All connectors must audibly engage.
Assemble engine.
Bleeding instructions must be observed without fail.


Categories: 11 Engine
Tags: exhaust turbochargers55water pump
tisbimmer :
Disqus Comments Loading...

This website uses cookies.