Removing and installing, replacing air mass meter on BMW M60, M62, M73 engines
13 62 560
Read the information in the fault memory of the DME control unit.
Switch off ignition.
Disconnect plug connection (1) on air mass meter.
Loosen the clamp (2).
Disconnect the suction hose from the air mass meter.
Open the clamps (1).
Disconnect the air mass meter from the top of the air filter.
Check the gasket (1) between the air mass meter and the top of the air filter, replace if damaged.
To facilitate installation, lubricate the sealing gasket with acid-free grease.
Read out the information in the fault memory of the Digital Engine Control Module (DME).
Check the recorded fault messages.
Repair the fault.
Erase the information in the fault memory.