52 13 000

Necessary preliminary tasks:

If necessary, remove head restraint

Removing and installing left or right front seat BMW Z4 E85

Release screw (1).

Remove seat belt (2).

Tightening torque 72 11 02AZ:

Type Thread Tightening specification Torque
1AZ Automatic reel

– to body

E85 / E86 Replace screw 31 Nm
2AZ Anchor fitting, belt

– to front seat

Replace screw
– Hexagon screw 16 mm

Thread without microencapsulation

E85 / E86 35 Nm
– Hexagon screw 13 mm

Thread with microencapsulation

E85 / E86 45 Nm
3AZ Belt tensioner

– to front seat

E85 / E86 Replace screw 31 Nm
4AZ Retaining bracket, belt tensioner

– to seat rail

E85 / E86 Replace screw 24 Nm

Release screws (3) on left and right.

Installation:

Replace microencapsulated nuts.

Tightening torque 52 10 01AZ.

Move front seat as far back as possible.

Removing and installing left or right front seat BMW Z4 E85

Unscrew nuts (3).

Installation:

Replace microencapsulated nuts.

Tightening torque 52 10 01AZ.

Release lock (1).

Disconnect plug connection (2).

Carefully lift out front seat (risk of damage).

Installation:

Carpet must not get between seat rails and floor pan in area of fastening points (grating noises).