Removing and installing front bumper assembly of the BMW 7 E38

51 11 000

Note:
Raise the hood.

Remove the bolts on the left and right sides and remove the side panels (1) wheel arch.
Изображение

Release screws on impact damper.
Installation:
Torque,
see. Specifications 51 11 2AZ
Изображение

Squeeze locking tabs up and take a little bit forward bumper.
Изображение

Alarm Park Distance Control:
If necessary, take a little forward bumper and disconnect plug connections of ultrasonic transformers.

Pull bumper slightly forward and detach the connector (1) of the left and right fog lamps.
headlight cleaning system:
If necessary, take a little forward bumper.
Remove the clip (2) to disconnect the hose (3), take it up or drown.
Изображение

Remove bumper traffic on using the 2nd person.
Изображение

Installation:
Height of bumper is adjusted by screwing in screws with hexagon socket.
Изображение