Removing and installing exhaust system for BMW M51 engine
1. Remove the crankcase protection panel and support the exhaust system assembly.
2. Give the holder of the catalytic converter support.
Изображение
3. Give the nuts and disconnect the exhaust pipe from the turbocharger.
Изображение
Attention: At installation replace nuts and grease a carving with copper-containing paste CRC.
4. Give hexagonal nuts and turn out bolts with шестигранной a head, remove a collar of fastening of a reception pipe.
Изображение
Attention: At installation put a collar of fastening of a reception pipe after full installation of system of release of the fulfilled gases so that components of system were not strained.
5. Give nuts and remove system of release of the fulfilled gases in gathering.
Изображение
6. Installation is in the reverse order.