BMW TIS Online
X

Removing and installing complete bearing block for foot pedal BMW 3 E90

35 11 000 

Necessary preliminary tasks:

Remove clutch pedal

Release screws (1) and gently press clutch master cylinder (2) to one side.

Installation:

Line remains connected.

Replace self-locking nuts.

Tightening torque 21 52 4AZ:

Type Thread Tightening specification Torque
1AZ Hydraulic line to clutch slave cylinder or throttle.
E36 / E38 / E39 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E81 / E87 / E90 / E91 / E92 14.5 Nm
E46 20 + 5 Nm
2AZ Clutch master cylinder to bearing support
E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E85 / E84 / E86 / E87 / E89 / E90 / E91 / E92 / E93 22 Nm
E83 8 Nm
3AZ Fitting screw, clutch master cylinder
E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92 / E93 22 Nm
4AZ Clutch master cylinder to pedal assembly
E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E81 / E82 / E83 / E84 / E85 / E86 / E87 / E88 / E89 / E90 / E91 / E92 / E93 9 Nm
5AZ Clutch slave cylinder to clutch housing/transmission case
E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E81 / E82 / E83 / E84 / E85 / E86 / E87 / E88 / E89 / E90 / E91 / E92 / E93 22 Nm
E60 / E63 7-speed SMG 25 Nm
6AZ Pressure accumulator to hydraulic unit
E36 / M3 35 Nm
7AZ Coupling bolts for hydraulic pipes
E46 / M3 14 Nm
8AZ Pressure accumulator for hydraulic unit
E46 / M3 40 Nm
9AZ Clutch position sensor to clutch slave cylinder
E46 / E60 / E61 / E63 / E64 / E85 6-speed SMG 2.5 Nm
E60 / E61 / E63 7-speed SMG 3.5 Nm
10AZ Banjo bolt, pipe, actuator/pump block
E60 / E61 / E63 7-speed SMG 18 Nm
11AZ Filler plug, expansion tank, pump block
E60 / E61 / E63 7-speed SMG 2.1 Nm
12AZ Throttle valve to clutch slave cylinder
E60, E61 17 Nm

Disconnect plug connection (1).

Remove locking clip (2) and pull out pin.

Unscrew nut (3).

Release nuts (4) and gently swivel bearing block to left and remove.

Installation:

Tighten nuts (4) before nut (3).

Replace self-locking nuts.

Tightening torque 35 11 1AZ:

Type Thread Tightening specification Torque
1AZ Bearing pedestal to brake assembly and body
E81, E82, E87, E88, E90, E91, E92, E93, E84 M8 Retighten 1x on brake booster after 5 min 21 Nm
E81, E82, E87, E88, E90, E91, E92, E93, E84 M6 8 Nm



Categories: 35 Pedals
tisbimmer :
Disqus Comments Loading...

This website uses cookies.