Removal and installation, replacement phone-holder unit (cordless phone series V) BMW X5 E53

84 11 510

Remove the phone from the holder block.
Remove the storage compartment.

Release the connector (1) from the clips.
Release screws (2) and remove the bracket (3).
Expand bandages and pull the harness (4) of the guide wire.
Installation:
Pay attention to correct routing of cables.
Изображение

Release screws (1).
Remove the armrest (2).
Изображение

Release screws (1).
Unhook the cover (2) from the latch and lift.
Изображение

Knock out pins (1) in the direction of the arrow.
Изображение

Disconnect the connector (1).
Lift the lid (2) with a screwdriver and pull the harness (3) wires.
Remove the phone interface (4).
Installation:
Pay attention to correct routing of cables.
Изображение

Move function carrier to a stop in the direction of the arrow.
Unlock retaining mustache.
Изображение

Pull the connecting cable from the phone guides.
Slide block holder (1) in the direction of the arrow and remove.
Изображение