BMW TIS Online
X

Removal and installation, replacement of the fuel filler flap actuator BMW 5 E60


Removal and installation, replacement of the fuel filler flap actuator BMW 5 E60

67 11 555

Necessary preliminary tasks:
Remove the luggage compartment trim panel on the right wing.
Disconnect the negative battery cable.

Unlock and disconnect plug connection (1).
Loosen the screws (2) and remove the actuator (3) of the fuel tank flap movement back out of the bracket.
Remove the actuator (3) of the fuel tank flap in the direction indicated by the arrow.

With the help of a suitable tool (eg pliers) to turn the sleeve (1) approx. 45Av to the direction of the arrow and taken out of the protective housing (2).

Installation:
Push the sleeve (1) on the locking pin (2) the fuel filler flap.
Pay attention to the reliability of the locking sleeve (1) in a protective casing (3).

Replacement:
Release screws (1).
Disconnect the drive cable (2) from the fuel filler flap actuator (3) hatch in the direction of the arrow.
Remove the actuator (3) the fuel filler flap from the bracket (4).
Installation:
Pay attention to the correct position of the clamp (5).
Adjust the actuator (3) the fuel filler flap through the slots (6). Flap must be fully locked or unlocked.


Categories: 67 Electric drives
Tags: actuatore60filter flap
tisbimmer :
Disqus Comments Loading...

This website uses cookies.