Removal and installation, replacement heater assembly of the BMW 3 E36
64 11 200
Remove the instrument panel,
see. 51 45 030
Remove the rubber band and pull the grille
Release screws on the cable box.
Release screws on the right side and remove the holder.
Remove the bolt from the left side and remove the case of the intake manifold upwards.
The body of the intake manifold can be removed only very accurately maintaining the direction.
Remove the bolt and move aside the connection flange.
Purge air supply line to the coolant residues not drip from the pad to the heating element.
Always replace the O-ring.
Release screws on left and right side.
Cut the cable ties (2), unscrew the bolts and remove the reinforcement tube of the steering column.
If necessary, remove reinforcement pipe passenger airbag.
Disconnect connector and cut the belt harness.
Remove the bolt and remove heater.