Removal and installation pump of the hydraulic booster a steering drive BMW 7 E38

32 41 060

Recycling:
Observe the rules in force in the country of recycling!
Recover the power-steering fluid reservoir, the liquid no longer apply.
Installation:
Fill and bleed the power steering system,
see. 32 13 006

Remove splash guard.
Remove the pump drive belt.
Disconnect the piping from the pump.
Installation:
Replace seals.
Torque,
see. Specifications 32 41 3AZ.

Connecting pipelines to a vane pump:
(1) to the steering
(2) to a tank
Изображение

Connecting pipelines to the tandem pump:
(1) to the steering
(2) to a tank
(3) to the clearance controller
Изображение

Unscrew the nut (3).
Installation:
To strengthen the stud (1) on the pump.
Torque,
see. Specifications 32 41 2AZ.
Hand tighten the nut (2) in the direction of the motor mount.
Tighten the nut (3).
Torque,
see. Specifications 32 41 2AZ.
Изображение

Unscrew the bolts to the oil sump and remove the pump.
Installation:
Torque,
see. Specifications 32 41 2AZ.
Изображение