Removal and installation of the water pump engine BMW M60
1. Drain the coolant.
2. Remove the vibration damper.
3. If necessary, disconnect the supply of additional air tube.
4. Turn out bolts and remove a pulley.
5. Remove the cooling pipe between the expansion tank and water pump.
6. Remove the cooling pipe from the thermostat housing cover, remove the cover of the thermostat housing and the thermostat itself.
7. Remove the screws and remove water pump.
8. When the installation check the location of the centering sleeves. Clean sealing faces, replace gasket.
9. Finally, remove the air from the cooling system and check for leaks.