BMW TIS Online
X

Removal and installation of final collectors. Engine M62

Removal and installation of final collectors. Engine M62
1. Remove the intake pipe and tube supply of additional air
Collectors right number of cylinders:
1. Give the bottom nuts of the exhaust manifold of cylinders №№ 7-9 and remove it.

2. Remove the valve assembly of the heater unit from the holder and place it on the manifold
3. Give the top fastening of a final collector nuts of cylinders №№ 10-12, remove thermofilter, give the bottom nuts and remove a collector.

4. Install in the reverse order. Lubricate the stud threads with copper paste, use the new reservoir mounting nuts. Gaskets place the smooth side to the cylinder head.
Collectors left number of cylinders:
1. Give the bottom nuts of the exhaust manifold (1) cylinders №№ 1-3 and remove it.

2. Remove thermofilter starter.
3. Give the top fastening of a final collector nuts of cylinders №№ 4-6, uncheck thermofilter, give the bottom nuts and remove a collector.

4. Install in the reverse order. Lubricate the stud threads with copper paste, use the new reservoir mounting nuts. Gaskets place the smooth side to the cylinder head.

Categories: 11 Engine
Tags: engine m62
tisbimmer :
Disqus Comments Loading...

This website uses cookies.