Maintenance under the rules Oil Service engine BMW M47

00 249 00

(Change engine oil and filter element)

A warning!
When working with the contours of oil, fuel and coolant must protect the alternator against contamination.
Cover the generator.
Failure to do so may result in damage to the generator failure.

Note:
Do not damage the cover fully in-line oil filter, to turn on and turn only socket wrench. When releasing the cover fully in-line oil filter the oil from the oil-water heat exchanger flows back into the oil sump.
Unscrew the lid fully in-line oil filter and remove upwards.
Installation:
Torque,
see. Technical Data 11 42 2AZ.
Изображение

Installation:
Replace and lubricate O-rings.
Изображение

Pull out the removable element (1) of the filter upwards.
Installation:
Push removable element (1) for fastening the filter element in the oil filter housing.
Изображение

Open the lid on the splash guard.
Open oil drain plug or pump out the oil.
Installation:
Replace sealing ring.
Torque,
see. Specifications November 13 1AZ.
Изображение

Pour the engine oil.
Return the removed parts and put the car in a horizontal position.
Start the engine and let it run at idle until the indicator lamp goes out oil pressure.
Switch off the engine, wait about 5 minutes and then check the oil level in the engine.