Changing the oil in the gearbox rear axle including the recycling of waste oil

00 11 259

A warning!
Risk of damage!
To avoid serious damage to the rear axle differential to fill it permitted only the recommended oil.

Note:
The gears of the rear axle with the label “Life-Time-Oil” to replace oil is not necessary.

Change the oil only be carried out when heated to the operating temperature of the rear axle gearbox.

Recycling:
Collect and dispose of oil escaping from the gear unit.

Observe country-specific waste-disposal

There is a drain plug:
Substitute fluid collection device.

Remove the plug (1) oil drain.

Drain the oil from the rear axle and send it for recycling.

Remove the plug (2) the oil filler hole.

Fill with oil to lower edge of the filler hole (2). The capacity, see. In the specifications.
Изображение

Installation:
A) Drain / filler plug with O-ring:

Replace sealing ring (1).
Tightening torque, 33 11 3AZ.
B) Drain / filler plug with O-ring:
Replace the oil drain / filler plug (2).
Tightening torque 33 11 9AZ.
Изображение

Oil drain plug is missing:
Remove the plug (1) the oil filler hole.
Drain the oil from the rear axle and send it for recycling.
Fill with oil to lower edge of the filler plug (1). The capacity, see. In the specifications.
Изображение

Installation:
A) the oil filler plug with O-ring:
Replace sealing ring (1).
Tightening torque 33 11 3AZ.
B) the oil filler plug with O-ring:
Replace the plug (2).
Tightening torque: 33 11 9AZ.
Изображение