BMW TIS Online
X

BMW engine Oil Service M51



BMW engine Oil Service M51

00 00 249

Change engine oil and oil filter insert.

Version with central screw:

Unfasten main flow oil filter cover – engine oil now flows back into oil pan.

Installation:

Tightening torque,

refer to Technical Data 11 42 2AZ

Installation:

Replace seals in full-flow oil filter cover and on the screw.

Remove oil filter insert.

Version with screw cap:

Note:

Do not damage main flow oil filter cover. Only open and tighten with socket wrench.

Unfasten full-flow oil filter cover, enabling engine oil to flow out of oil filter and back into the oil pan.

Installation:

Tightening torque,

refer to Technical Data 11 42 2AZ

Installation:

Replace seals and coat with oil.

Unscrew and remove splash guard.

Open oil drain plug or drain off oil.

Installation:

Replace sealing ring.

Tightening torque,

refer to Technical Data 11 13 1AZ

Top up engine oil.

Switch on engine and run at idle until oil indicator lamp goes out.

Stop engine and check oil level.

Note:

Park vehicle on level ground.


This post was last modified on April 17, 2017, 3:26 pm

Categories: 00 Maintenance and general data
Tags: m51oil service
tisbimmer :
Disqus Comments Loading...

This website uses cookies.