BMW engine Oil Service M51

00 00 249

Change engine oil and oil filter insert.

Version with central screw:

Unfasten main flow oil filter cover – engine oil now flows back into oil pan.

Installation:

Tightening torque,

refer to Technical Data 11 42 2AZ

Изображение

Installation:

Replace seals in full-flow oil filter cover and on the screw.

Изображение

Remove oil filter insert.

Изображение

Version with screw cap:

Note:

Do not damage main flow oil filter cover. Only open and tighten with socket wrench.

Unfasten full-flow oil filter cover, enabling engine oil to flow out of oil filter and back into the oil pan.

Installation:

Tightening torque,

refer to Technical Data 11 42 2AZ

Изображение

Installation:

Replace seals and coat with oil.

Изображение

Unscrew and remove splash guard.

Open oil drain plug or drain off oil.

Installation:

Replace sealing ring.

Tightening torque,

refer to Technical Data 11 13 1AZ

Изображение

Top up engine oil.

Switch on engine and run at idle until oil indicator lamp goes out.

Stop engine and check oil level.

Note:

Park vehicle on level ground.