54 12 003 

Close glass sunroof lid (zero position).

Distance:

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Distance (A) between lid and front and rear of roof must be the same.

Slide a credit card or identity card in between seal and lid. The card must show the same resistance.

Height:

Front – flush to 1 mm deeper

Rear – flush to 1 mm higher

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Adjustment/removal of glass slide/tilt sunroof lid:

Slowly slide headliner (floating) towards rear up to distance (A).

Measurement (A) = 90 mm.

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Slacken screws (1) on left/right.Note:

For adjustment, only slacken screws (1) to such an extent that glass sunroof lid (2) is still just adjustable.

To remove glass sunroof lid (2), release screws (1) completely.

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Height adjustment:

Adjust height of lid (1) to roof (2) with special tool 00 9 315 (gap wedge).

Press glass sunroof lid at front and rear upwards/downwards until ideal position is obtained.

Tightening torque, 54 12 2AZ.

Check function and adjustment.

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Replace screws (1) when removing and installing glass sunroof lid (2).

Installation:

Tightening torque, 54 12 2AZ.

Installation:

Initialize sunroof.

Adjusting glass slide/tilt sunroof lid BMW 3 E46

Slowly pull headliner (floating) fully towards front.