Replacing fan cowl engine BMW M67

17 11 031

A warning!
Danger of scalding!
Only perform these tasks on a cold engine.

Remove nasechnye rivets (1).
Carefully lift the cover (2).
Compress the bracket clips (3).
Remove bracket (3).
Изображение

Remove the cover (1).
Cut the clamp (2).
Remove nasechnye rivets (3).
Installation:
Replace hose clamp (2).
Изображение

Cut the collar (1).
Disconnect the hose (2).
Installation:
Replace hose clamp (1).
Изображение

Remove the sensor (1) AUC system fan housing.
Изображение

A warning!
Do not damage the radiator fins.
To remove the impeller (2) of the fan:
– Hold the water pump for the tetrahedron.
Unscrew the union nut (1) with special tool 11 5 040.
Torque,
cm. Technical Data 11 52 1AZ.
Изображение

Raise the cover (1) fan with a screwdriver (2) and lift above the propeller (3) to remove the air.
Pull expansion tank (4) back and disconnect from the housing (1) of the fan.
Snap the expansion tank (4) wire, or something else.
Изображение

Loosen the clamp (1).
Disconnect water hose (2).
Installation:
Replace hose clamp (1).
Изображение

Disconnect the profile seal (1) from the housing (2) of the fan.
Installation:
Ensure that the profile of the seal (1).
Изображение

A warning!
Do not damage the connecting pipe (3).
Do not damage the radiator fins.
Carefully remove the cover (1) together with the fan impeller (2) upwards.
Изображение

Installation:
Ensure correct position of the vent hose (1) in the housing (2) of the fan.
Изображение

Installation:
Check protective edging (1) the presence and correct position.
Изображение

Installation:
Carefully hold the connecting tube (1) past the damper (2) of the fan housing.
Изображение

Installation:
Insert the locking tabs (1) in the cassette holder on the radiator.
Изображение