Removing and installing toothed belt cover engines M20 M40
1. Disconnect the battery from weight.
2. Remove the coupling and fan cover of the cooling system.
3. On the M20 engine, remove the radiator.
4. Remove the fan belt pulley.
5. Disconnect the sensor crank that on the cover of a gear belt and take aside (if the sensor is provided).
6. On the part of the vehicle, remove the ignition distributor cap.
Изображение
7. Remove the slider.
Изображение
8. Remove the plastic cover under the black slider.
Изображение
9. Remove the bottom of the fan belt pulley and the pulley-damper. When you release the peripheral attachment pulley bolts hold the key central bolt.
Изображение
Изображение
10. Remove the bolts and nuts of fastening of covers to the engine, remove the top one first, then the bottom cover (M20 engine).
Изображение
Изображение
Remove the bolts and nuts of fastening of covers to the engine, remove the top one first, then the bottom cover (M40 engine).
Note: Ensure the safety of the guide bushings of the upper cover bolts.
11. The assembly is performed in reverse order.