Removing and installing, replacing the rear nameplate with the name BMW X5 models

51 14 110

A warning!
“Instructions for gluing labels” are the basis of this section of the Guide to repair and must be strictly adhered to.

Изображение
Attach the top edge of the adhesive tape (1) parallel to the bottom edge of the tailgate (2) at a distance “A”.
Make a mark on the upper edge of the tape at a distance “B” from the lateral edge (3).
Dimensions for BMW X5 E53:
A = 22 mm; B = 53 mm
Dimensions for BMW X5 E70:
A = 20 mm; B = 57 mm

Note:
Size “C” is given for information purposes only, as it is defined base film.
C = 8,7 mm