Removing and installing, replacing the rear nameplate with model designation BMW 3 E46

51 14 110

A warning!
“Instructions for gluing labels” are the basis of this section of the Guide to repair and must be observed.

Dimensions Sedan BMW E46:
Изображение
Stick adhesive tape to upper edge “A” and note “B” size.
Sedan 316 i … 330 i:
A = 50 mm
B = 25 mm

Saloon 318 d … 330 d:
A = 50 mm
B = 25 mm

Dimensions for the coupe and convertible BMW E46:
Изображение
Stick adhesive tape to upper edge “A” and note “B” size.

Coupe (all except M3) A = 55 mm B = 15,5 mm
Coupe M3 A = 42,5 mm B = 41 mm
Convertible (except M3 and 320 Cd) A = 42,5 mm B = 21 mm
Convertible M3 A = 16,4 mm B = 10,8 mm
Cabriolet 320 Cd A = 56,5 mm B = 19 mm

Dimensions Touring BMW E46:
Изображение
Stick adhesive tape (1) from the edge (2) of the boot lid to the upper edge of the size of the “A” and note “B” size.
When sticking labels withstand size “C”.
Touring 316 i … 330 i:
A = 35 mm
B = 25 mm
C = 1 mm

Touring 318 d … 330 d:
A = 35 mm
B = 25 mm
C = 1 mm

Touring 325 xi, 330 xi, 330 xd:
A = 35 mm
B = 25 mm
C = 1 mm

Dimensions for Compact BMW E46:
Изображение
Stick adhesive tape (1) from the edge (2) of the boot lid to the size of “A” and note “B” size.
When sticking labels withstand size “C”.
Compact 316 ti … 325 ti:
A = 41 mm
B = 134,5 mm
C = 1 mm

Compact 318 td, 320 td:
A = 41 mm
B = 134,5 mm
C = 1 mm