Removing and installing, replacing the master cylinder clutch for BMW 7 E38

21 52 500

Note:
After completing work, bleed clutch hydraulic,
see. 21 00 006.

Brake fluid drained until its level reaches the level of the place where the hydraulic drive of the supply line (1) coupling. The device used for this purpose shall be used exclusively to drain the brake fluid.
Disconnect the supply line (1) from the tank.
Изображение

Remove the left lower trim of the instrument panel.

Remove the clip (1) and remove the pin.
Изображение

Release screws.
Изображение

Remove the clip (1).
Note:
Avoid spilling brake fluid on the interior carpet.
Disconnect from the master cylinder (2) clutch lines to the slave cylinder and remove it along with the supply line (lines to a tank).
Изображение