Removing and installing, replacing left or right front turn signal lamp additional BMW X5 E53

63 13 200

Move an additional pointer (1) rotate forward and lift.
Installation:
Pay attention to the correct position of the seal.
If necessary, replace the seal.
Secure retainer (2) in the mudguard.
Изображение

Disconnect the connector (1) and remove the additional direction indicator (2).
Turn the bulb holder (3) approx. at 45A counterclockwise and remove it.
Remove the bulb from the socket.
Note:
Do not touch the bulb of the new lamp with your bare hands. Take the lamp only cap or use a clean handkerchief or packaging of the lamp.
Use the appropriate type of lamp.
Изображение