Removing and installing or replacing clutch slave cylinder BMW 5 E39

21 52 510

Special tools required:
13 3 010

Note:
After completing work, bleed clutch hydraulic,
see. 21 00 006.

Remove microfilter housing (1).
Изображение

Seal the opening of the supply lines to the clutch master cylinder with special tool 13 3 010.
Изображение

Remove the lower gearbox casing.
Remove pressure line from clutch slave cylinder.
Installation:
Torque,
see. Specifications 21 52 1AZ.
Изображение

Remove nuts.
Remove the slave cylinder.
Installation:
Torque,
see. Specifications 21 52 5AZ.
Изображение

Installation:
Clear pusher and its coupling plane with the clutch release fork.
Lubricate the plunger a little grease.
Grease, refer to. BMW Service Operating Fluids.
Изображение