Removal and installation of the oil pump. Engine M60
1. Remove the engine oil pan.
2. Remove the oil pump sprocket housing, which, depending on the version, turn out bolts of its fastening or release the latches of the cover.
Изображение
3. Give a nut and remove sprocket with chain.
Изображение
4. Remove the pump mounting bolts and remove it.
Изображение
5. If necessary, tighten the retaining snap ring and remove the pressure relief valve.
6. Install in the reverse order. Adjust the chain tension to a value of A = 10 ± 2 mm by turning the key Prutkov threaded bushing in the oil pump.
Изображение