Changing the oil in the engines of BMW M40, M42, M43, M43TU, M44

00 249 00

Change engine oil and oil filter.

Version with central bolt:
Unscrew the oil filter cover.
The oil flows from the filter housing into the oil sump.
Installation:
Replace sealing ring.
Torque,
cm. Technical Data 11 42 2AZ.
Изображение

Installation:
Replace the O-ring of the oil filter cover and sealing ring bolt.
Изображение

Remove the filter element.
Изображение

Version with screw cap:
Remove the oil filter cap with special tool 11 7 331.
The oil flows from the filter housing into the oil sump.
Installation:
Torque,
cm. Technical Data 11 42 2AZ.
Изображение

Installation:
Replace and lubricate O-rings.
Изображение

After the oil to drain from the filter housing, unscrew the drain plug or pump out the oil.
Installation:
Replace sealing ring.
Torque,
cm. Specifications November 13 1AZ
Изображение

A warning!
For vehicles that run on natural gas, should be used only certified engine oil, specially designed for these vehicles (see. BMW Service Operating Fluids).
Pour the engine oil.
Start the engine and let it run at idle until the indicator lamp goes out oil pressure.
Stop the engine and check the oil level.